RAVAK Standard 90 shower tray waste trap
Standard shower tray waste trap
With high popularity and quality. A simple design and first quality for every bathroom.
Without a waste trap, no shower tray could fulfil its purpose and drain water away during showering. Because a shower tray is a built-in part of a bathroom, only choose drains that are made of the highest quality materials which will truly last.
RAVAK Basic, Standard and Professional shower tray waste traps have a diameter of 90 mm and a drainage flow rate of 30 litres per minute. This facilitates their use in shower enclosures with a hydromassage panel. All RAVAK shower tray waste traps can be cleaned from the outside, which is a prerequisite for their use with shower trays installed in a "fixed" manner. Standard and Professional waste traps differ in the type of material used for the waste trap cap. The Professional waste trap is equipped with a metal cap, while the Standard waste trap has a metal-plated plastic cap. We recommend these waste traps for Galaxy Pro shower trays. For deep-seated Sabina shower trays, we offer the Sabina waste trap with a 52 mm diameter opening for the waste trap and overflow. The shower tray can be drained using the ClickClack system (pressing the waste trap stops drainage and pressing it again starts drainage).
Adequate drainage volume
RAVAK waste traps are able to drain a minimum of 30 litres of water per minute, which means they are able to handle a shower enclosure equipped with a hydromassage panel.
Easy to clean
Easy access and the ability to clean the waste trap are essential for your peace of mind and long-term confidence. You needn't live in fear that the waste trap will clog and you will be forced to find a plumber.
For every RAVAK shower tray model
RAVAK waste traps are available in three types to cover each shower tray model.
- Diameter: 9 cm
- Height: 8.4 cm
- Water outflow per minute: 32 litres
- Cover cap: Chrome-plated plastic
The Standard 90 shower tray waste trap is suitable for all types of shower trays (90 mm diameter) except the deep Sabina trays. We also supply adapters eliminating size differences between the RAVAK waste traps (40 mm diameter) and drain pipes (50 mm diameter).
|X01314||Siphon STANDARD 90 CHROM|
|X01304||Seal reduction 40/50mm|