The product ranges of RAVAK have been developed during many years of experience with both standard and non-standard requirements of our customers.

It is no exaggeration to say that in any normal situation our products can easily meet your requirements.

You may, for example, need something a little out of the ordinary. In this case, RAVAK can manufacture a “tailor made” product according to your needs. Not all of our product ranges can offer you this possibility, but your patience will be rewarded.

Do you have a bathroom built to non-standard parameters but not know how to install a shower enclosure of normal dimensions into it? RAVAK are able to manufacture an atypical shower enclosure according to your exact requirements.

Among the non-standard products that are most frequently requested to be “tailor- made” are the so-called angled products - the shower enclosures for attic bathrooms. This type of atypical product is available from each range of RAVAK shower enclosure. Mostly, it’s not a problem to widen, narrow or shorten the product. However, some restrictions still need to be taken into account.

The following table shows you a list of restrictions concerning the SUPERNOVA product range.

SUPERNOVA - ATYPICAL SITUATIONS
Product	Maximum width	Maximum height	Minimum width	Minimum height	Angled
Shower doors
SDP3	2080	2050	560	500	0
SDOP	2080	2050	560	500	√
Corner entrance enclosures
SRV2 + SRV2 (polystyrene)	1400/1300	2050	530	500	0
SRV3 + SRV3 (polystyrene)	1300/1200	2050	650	500	0
polystyrene	1100	2050	165	500	√
SRV3 + SRV2 (polystyrene)	1400/1300	2050	530 + 650	500	0
VS2 (polystyrene)	1400/1300	1500	145	500	0
VS3 (polystyrene)	1400/1300	1500	200	500	0
VS5 (polystyrene)	1400/1300	1500	305	500	0
VSK2 (polystyrene)	1400/1300	1500	145	500	0
PS polystyrene	900	2050	75	500	√
PS + PS + PS + ...	∞	1500	0	500	√
VDP3	2080	2050	560	500	0
SDZ2	776	2050	560	500	√
SDZ3	1600	2050	740	500	√
SDOP + 0	780	2050	560	500	√
SDOP + 1 fixed part díl	1600	2050	740	500	√
SDOP + 2 fixed parts	2080	2050	740	500	√
Quadrant shower enclosures
	1450/1450	2050	650	500	√

SUPERNOVA SDOP

GLASSLINE GSD3

Atypical solutions for the ELEGANCE product range
Maximum width of both the movable and fixed parts of these products is fixed at 1,300 mm. Maximum height of the products is 2,050 mm.
Manufacturing an angled product for the fixed part of these products is not a serious problem either.

Atypical solutions for GLASSLINE product range
First of all, you need to take into account that the possibilities to change the width of movable parts or doors are limited. The threshold strips come as one single piece that can't be shortened, and therefore it is not possible to narrow the doors.
The minimum width of one side of the product is 734 mm. The maximum width is 2,024 mm. The maximum height of the GLASSLINE range products is 2,100 mm. The fixed parts of the product can also be manufactured as angled. Curved glass doors cannot be supplied in atypical dimensions except in large quantities.