RAVAK Thinking bathroom? Think RAVAK

 
Certificate ISO 9001
  Home | About us | Contacts | News | Products | Download | Service | Training Index | Site map | International

Corner Entrance Enclosures SRV2 - S, ASRV3

SRV2 - larger image
SRV2 - S
Completed SRV2 - S shower enclosure consists of two fixed parts (to be installed at the bathroom walls) and two sliding parts.
larger scheme
ASRV3 - larger image
ASRV3
ASRV3 -Completed ASRV3 shower enclosure consists of two fixed parts (to be installed at the bathroom walls) and four sliding parts.
larger scheme
SRV2 - S and ASRV3 corner entry shower enclosures
The SRV2 - S and ASRV3 are designed for installation in the corner of a room. Both models consist of two separately packed parts, and each part is sold separately for its own price. That enables the customers to choose and combine either the square or the rectangle dimensional variant.
One half of the SRV2 - S must be completed with the other SRV2 - S half. The same applies for the ASRV3. It is not possible to combine the two-profile SRV2 - S with the three-profile ASRV3.
Completed SRV2 - S and ASRV3 shower enclosures can be complemented with a PSS fixed wall to obtain a U-shape shower enclosure.
more about Anti Block system invisible shield - Anticalc

SHOWER ENCLOSURES
SUPERNOVA | PIVOT | BLIX | RAPIER | GLASSLINE
ELEGANCE | WHITEWATER

SHOWER ENCLOSURES


SUPERNOVA Range



Corner Entrance Enclosures SRV2 - S, ASRV3


3D MODEL OVERVIEW


ALTERNATIVE PRODUCTS

SRV2, SRV3 -> RKRV2, ESKR2, GSRV4
SKHP6 -> GSH3

TIPS AND ADVICE

The system of sliding doors that do not take any space when being opened, together with maximum convenient ground plan create an unequalled space-saving variant of a shower enclosure. If you lack space in your bathroom, and if you are looking for a shower enclosure with a reasonable price, then the SKHP6 is the right one for you.
When assembling a corner-entry shower enclosure, make sure you adjust the polarity of the magnetic profile by reversing it as necessary.
After installing your shower enclosure, use the RAVAK silicon for final sealing -seal from the outside of the enclosure only. Never seal the horizontal profiles from the inside of the enclosure!

FILES TO DOWNLOAD

Catalogues
Certificates and Conformity statements


Recommend this webpage by e-mailSend to a friend © 2004-2010 RAVAK a.s.